The heavy security machinery will always be a major focus in the development of the activities of a transport company or construction because of the operation. One takes traceability to optimize all processes of machinery and minimize accidents.
Before starting the open fieldwork activities, there must be a strategic execution plan to avoid mishaps with the machines or the operating personnel. As a logistics coordinator, it is important to maintain bilateral communication with the collaborators since they must report any anomaly that is presented in the field. Likewise, it is essential to keep staff informed about job rotations, stipulated daily activities, and the risks that these may have if the proper precautions are not taken.
Heavy Machine Maintenance Tips
To maintain safety in heavy machinery, you must know the capacity of the load, if it is low, medium, or high, or according to the work area, since it depends on the work system you have designed in the planning, it will be known if heavy machinery is involved. Movement without rotation with limited rotation or with rotation and, finally, the form of mobilization of the machinery, since they can be tires, tracks, rails, or static.
Tips for heavy machinery’s longevity
It is necessary to bear in mind that heavy machinery should never be left alone due to the insecurities that may arise in the field. You must explain to your operator that if the machine being operated is a bulldozer or excavator type, it can be left parked only when the shovel or scarifier is fully supported on the ground.
Slopes of the terrain
At the beginning of the logistics planning of activities, it is important to know that there is a maximum number of slopes that should not be exceeded. If this happens, the lives of the collaborators and the useful life of the machine are exposed. The maximum slope of the land where bulldozer-type machine operations are being carried out will be 30%.
Order when parking
At the end of the activities on-site, your operator must bear in mind that it must be switched off when the machine is no longer in use. Also, you must support the bucket, shovel, or bucket on the ground, apply the brake and remain 3 meters away from the edge of excavations, ditches, or wells.
Start of activities
The heavy safety machinery must be present from start to finish. Therefore, before starting any activity, the operator must check the operating conditions, check the engine, oil, and radiator water, and inform you if any anomaly is found, thus avoiding a possible malfunction.
Entrance of operators
From the logistics coordination, it is necessary to have a security ring around the area of operations to prevent people outside the projects that are being developed in the open field from entering irregularly. Remember that they should not remain within the radius of action of the machinery.
Each operator must personally take charge of cleaning and cleaning the machinery and thus avoid damage due to obstructions from external climatic agents.
Suppose any unforeseen event occurs in the development of the work. In that case, your logistics operation team must make sure that each operator has the different personal protection elements defined by the company’s logistics coordination, such as:
Helmet: it is recommended that the helmet is adapted to the type of load with which it is handled and that it has ear muffs and chin guards to maximize protection.
Vest: it is an essential element for the identification of the operator at great distances. These must be reflective and of striking colors.
Gloves: these can be made of leather or wool to avoid cuts to the extremities.
Earplug: this element is essential in the open field when excavating. It prevents hearing loss.
The heavy security machinery begins with the work of the area of logistics coordination. It is necessary to ensure that the machines are for single occupational use. The operators must be instructed that people should not be transported inside the machine or hanging from it and how to carry out other activities such as eating, sleeping, or checking their mobile devices.
Maintenance of machinery
To achieve good maintenance or repair of the machine, it must be turned off, without the ignition key, with the command controls as they should be, and brakes.
To start operations successfully, it is necessary to put on the seat belt and adjust the chair to his level, depending on his physical conditions. Every machine must-have elements for emergency care, such as a fire extinguisher and a first-aid kit. Remember that all the controls must remain neutral before turning on the machine so that there are no untimely starts of the equipment.